Samebutdifferent
Active Member
VIP Member
Does anyone have the part number of the cover that fits the bracket mounting hole when the awning is removed? Thanks.
Last edited:
Buy all your Marco Polo Accessories at the Club Shop Visit Shop
Samebutdifferent
Active Member
VIP Member
Failing a part number does anyone have a cover they don't want?
Any idea what it looks like SBD? Simple grommet may temporarily cover it?
Samebutdifferent
Active Member
VIP Member
No, I read about it on this forum, apparently some found it in the glove box.
This is the fixing bolt when awning is removed, it can be slid out.
Samebutdifferent
Active Member
VIP Member
I didn't get the cover when I picked up my MP. I would have noted it for sure.
Nice temporary fix with the grommets - another idea is if you knew of anyone who has a 3D printer. I wouldn't have thought it was too difficult to knock out a design and print one
Samebutdifferent
Active Member
VIP Member
I collect the van tomorrow so can't take credit for the fix, that's down to Campersales who I'm buying from.
I wanted them to remove the awning as I thought it better than me struggling and the potential damage I might do.
Cover price is a staggering 25e. Good idea re 3D printing though.
I wanted them to remove the awning as I thought it better than me struggling and the potential damage I might do.
Cover price is a staggering 25e. Good idea re 3D printing though.
Samebutdifferent
Active Member
VIP Member
Like so many things MP/Westfalia the awning rail cover remains elusive.
I was lead to believe that there was a cover in the glove box for use when the awning (bit of a misnomer as in reality it's a poor excuse for a sun shade) was removed:
This is from the previously mentioned thread that started my search for the cover:
When the car was delivered, there was a plastic cover in the glove compartment. It fits when the awning is removed.
So I got the proper cover ordered from Westfalia:
Looks like it's a cover for use when the awning is fitted, I had the awning removed before I collected the MP so never seen a fitted awning.
The grommet fix was ok but I thought in absence of the cover I'd make a more permanent job.
The bracket is Sikaflexed in place so I considered 'cheese wiring' it off but decided against that when I remembered I had a pack of Sugru.
If a future owner wants to fit an awning it wouldn't be to much of a job to remove the Sugru.
I think it's an acceptable fix and doesn't look to out of place..
Thought this might interest @Epigram
I was lead to believe that there was a cover in the glove box for use when the awning (bit of a misnomer as in reality it's a poor excuse for a sun shade) was removed:
This is from the previously mentioned thread that started my search for the cover:
When the car was delivered, there was a plastic cover in the glove compartment. It fits when the awning is removed.
So I got the proper cover ordered from Westfalia:
Looks like it's a cover for use when the awning is fitted, I had the awning removed before I collected the MP so never seen a fitted awning.
The grommet fix was ok but I thought in absence of the cover I'd make a more permanent job.
The bracket is Sikaflexed in place so I considered 'cheese wiring' it off but decided against that when I remembered I had a pack of Sugru.
If a future owner wants to fit an awning it wouldn't be to much of a job to remove the Sugru.
I think it's an acceptable fix and doesn't look to out of place..
Thought this might interest @Epigram
Grand Tourismo
Active Member
Check out this thread SBD, is this the errant plate?
www.marcopoloownersclub.com
Anyone taken delivery yet of 2021 model?
I see that some of you are talking about the % of the state of your leisure battery. Where or how are you getting that information as I couldn’t find it on my control panel. When plugged in to the mains I get a bar graph going from one to ten to indicate that the battery is charging. If I unplug...
www.marcopoloownersclub.com
Samebutdifferent
Active Member
VIP Member
Check out this thread SBD, is this the errant plate?
Anyone taken delivery yet of 2021 model?
I see that some of you are talking about the % of the state of your leisure battery. Where or how are you getting that information as I couldn’t find it on my control panel. When plugged in to the mains I get a bar graph going from one to ten to indicate that the battery is charging. If I unplug...
Ha Ha.... probably one of the few that exists that no one knows what they're for or why they have them.
I'm happy with my work around but do wish I could get a wiring diagram or at least some info about the electrics.
